Mediasuite: Setup Foot Pedal


A serial dual foot pedal to capture camera images is integrated into Mediasuite.

To add the foot-pedal interface:

  1. Go to Capture menu > Foot Pedal Setup

  2. Select the device name from the droplist

  3. Usually the dual pedal operates as follows

    1. First Left – Image is frozen

    2. Second Left – Image is saved and the preview goes live

    3. Single Right works only after the First Left – Image is not saved and goes live

  4. Mark the Reverse A/B check box to swap the functions of the left and right pedals as above

  5. Enter the COM Port number (1-127)

  6.  Click OK                                                                                                                                                  mceclip3.png






0 out of 0 found this helpful



Article is closed for comments.