Generate and Print Sterilisation Labels

D4W can work with autoclaves that generate their own labels (e.g. Lisa), but are not recommend as they do not generate unique labels for each pack. D4W/PSS can generate labels that are just as cost effective.

The recommended label is Avery J8651 Inkjet or L7651EV, dimensions are: 38.1mm x 21.2mm, 65 labels per sheet.

1. Go to Location Management > Sterilisation tab

2. Autoclave menu > Generate & Print Labels

   1. Label Type: Select the relevant labels

   2. Bar Codes

      1. Initial: This will either be locked or open, depending on the setting

      2. Amount: Enter the number of labels to generate

   3. Address Position: Change the position of the barcode; only do this if test show it is needed

   4. Font: Change the size of the font if needed

   5. Print Setup: Ensure the correct printer is selected

   6. Click Print