Mediasuite: CMScan Capture an image

Follow

The Capture option allows connection to different devices for tooth shooting to the Mediasuite.

Once devices are connected to the system, they will be displayed In the MediaSuite Scanner window.

  1. Click Capture using Client Scanner icon

    1. The 'Client Capture' will start the 'MediaSuite Scanner' window

    2. Select your device name. Example: IP Image Acquisition
      mceclip2.png

  2. A counter box may appear while the device interface window opens. This screen is normal. If the counter continues to count upwards for longer than 20 seconds, the interface window may be automatically minimised on the taskbar.
    mceclip1.png

  3. The device interface window will appear onscreen. Follow steps according to the device instruction. 
    Example: CS7600 device
    mceclip2.png

  4. When finished the 'Client Capture' window will commence transferring. You may see this window again as the image/s are transferred, please wait as it will close automatically.
    mceclip1.png

  5. The image/s will be presented in Mediasuite for processing
    mceclip0.png

0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.